Same day dispatch for orders placed before 3pm (NZDT), Free shipping on all orders $1000+GST*
Description
Specifications
Resources
Package Contents
Cambium XP Power 120W PSU for cnRanger BBU, RRH and PTP 820G.
Features
- Replaces model WB3622
- Suitable for Cambium cnRanger BBU, RRH or PTP 820G
- DIN Mountable Power Supply
- Input Voltage 115 / 230 VAC
- Output Voltage 48VDC 120W
| Details | |
|---|---|
| Product Code | N000000L129A |
| Input Voltage | 90-132/180-264 VAC, auto select |
| Input Frequency | 47-63 Hz |
| Input Current | See tables in datasheet |
| Inrush Current | 24/48 A at 115/230 VAC |
| Power Factor | 0.7 typical |
| Earth Leakage Current | 0.8 mA max |
| Input Protection | T3.15A, 250 VAC |
| Output Voltage | See tables in datasheet |
| Output Voltage Trim | See tables in datasheet |
| Initial Set Accuracy | ±1% |
| Minimum Load | No minimum load required |
| Start Up Delay | <1 s (may increase at low temperature extremes) |
| Start Up Rise Time | <150 ms |
| Hold Up Time | 25/30 ms at 115/230 VAC |
| Line Regulation | ±0.5% max |
| Load Regulation | ±1% (±5% for units in parallel) |
| Parallel Operation | A maximum of 3 units can be paralleled (not with standby system). Total power available is 90% of the rated current of each unit. Minimum load per unit 10% |
| Transient Response | 4% max deviation recovering to within 1% in 2 ms for a 50% load change |
| Ripple & Noise | 50 mV pk-pk (DNR120), 20 MHz bandwidth (may increase at low temperature extremes) |
| Overvoltage Protection | Output clamps at 125-140% Vnom, auto recovery |
| Overload Protection | 105-145% constant current, auto recovery |
| Temp. Coefficient | ±0.03%/°C |
| Efficiency | See table in datasheet |
| Isolation | 3000 VAC Input to Output, 1500 VAC Input to Ground, 500 VAC Output to Ground |
| Switching Frequency | See table in datasheet |
| Signals | DC ON indicator Green LED, DC LOW indicator Red LED, DC OK: 24 V and standby models |
| MTBF | 430 kHrs typical Bellcore, Issue 6 at +40 °C, GB |
| DIN Rail | Compatible with TS35/7.5 or TS35/15 |
| Operating Temperature | DNR120: -35 °C to +70 °C, derate linearly from +60 °C at 2.5%/°C, start up at -30 °C |
| Cooling | Convection-cooled with 25mm free space all sides |
| Operating Altitude | 5000m |
| Operating Humidity | 20-95% RH, non-condensing |
| Storage Temperature | -40 °C to +85 °C |
| Shock | 15 g, 11 ms, 3 axes, 6 faces, 3 shocks per face |
| Vibration | 2 g, 10 Hz to 500 Hz, along X, |
| Details |
|---|
There are yet no reviews for this product.
Please log in to write a review. Log in
Related Products
