Laird POE-5S-AFI PoE Splitter 802.3af to 5VDC Output. The active Power-Over-Ethernet (POE) splitter from Laird gives "carrier class" performance in a low cost system. With its IEEE 802.3af compatibility and advanced auto-sensing algorithm, it will accept POE power from any IEEE 802.3af router or power supply. The overload and short circuit protection will shut down power immediately when a short circuit is detected without any damage to the POE system. Power (36 to 60 V) is expected on ethernet pins 4/5 (V+) and 7/8 (V-) as per the IEEE 802.3af standard or pins 1,2,3,6 (Cisco Standard).
- The power supply can be centrally located where it can be attached to an uninterruptible power supply.
- Power can be supplied over long distances, up to 300 feet
- Power can be available wherever network access is available
- The user has the ability to easily power-on reset the attached equipment from a remote location
|Details || |
|Input Voltage||36 to 60 VDC|
|Operating Humidity||5% to 90% non condensing|
|Output Voltage||POE-5s 5 [email protected] 2.4 A|
|Size||83 x 76 x 38 mm (3.25 x 3 x 1.5 inches)|
|Weight||130 gm (4.6 oz)|
|Compliance||EMS EN61000-4-2,3,4,5,6,8,11,compliance IEEE :802.3af POE Standard, Compliance-EMI EN55022 ( CISPR22) class B|
There are yet no reviews for this product.
Please log in to write a review. Log in