Ubiquiti FiberPoE Optical Data Transport for Outdoor PoE G2
Ubiquiti FiberPoE Optical Data Transport for Outdoor PoE Devices
PoE (non standard)
Overcome PoE limitations with the FiberPoE™. The FiberPoE F-POE-G2 is a low-cost solution for outdoor deployments that require long-distance runs to reach the PoE device. Deployments with the FiberPoE also provide significant EMI and ESD protection over typical PoE installations. PoE is ideal for indoor or short-run installations. However, for outdoor, long-distance installations, PoE becomes vulnerable to EMI and is limited to 100 meters with correlated power loss. With the FiberPoE, data and power are transported on separate cables to greatly improve data integrity and enable much longer cable runs. The FiberPoE provides Gigabit bi-directional data transport between twisted-pair Ethernet cable and fiber optic cable, and injects DC power to the Ethernet cable for passive PoE. Use one FiberPoE device as an Fiber-to-Ethernet Converter, or a pair of FiberPoE devices to create a Fiber Bridge. Using fiber optic cable for data transport significantly reduces electrostatic discharge (ESD) failures and electromagnetic interference (EMI). Data integrity is also sustained in runs beyond 100 meters, the limit of Ethernet over twisted-pair cable.
- The FiberPoE supports a 1G SFP module and 24V or 50V power from a DC power cable or PoE cable.
|Manufacturer's Product Code||F-POE-G2|
|Input Voltage||16 to 57VDC|
|Output Voltage||PoE RJ45 Port, 2-Pair (4, 5+; 7, 8-) (24VDC), or 4-Pair (24VDC or 50VDC) PoE|
|Interfaces||(1) 1 Gbps SFP Port, (1) DC Terminal Block, (1) DC RJ45 Port DC Injection, (1) 1000 Mbps Ethernet PoE Port|
|Dimensions||196.4 x 93.5 x 32.4 mm|