Milesight is passionate about the connectivity of “things” to the cloud with LoRaWAN IoT. They leverage the value of the top trending technologies that transform the world we live in and are committed to their partners who share the same passion. They believe that the complexity of data collection, storage and retrieval can be simplified into the Cloud-intelligence. The development and distribution of these appliances and services demonstrates their commitment to the digital transformation and continues to deliver compelling connectivity for IoT world.
Go Wireless NZ is very happy to be the Master Distributor for Milesight in New Zealand and the South Pacific and is committed to providing the best service and support across their range of LoRaWAN IoT solutions.
The Ursalink Remote I/O Controller is designed as a cost-effective industrial machine monitoring device. The unit monitors and controls up to 2 DC signals and 2 drivable relay outputs. User-defined SMS/USSD messages are sent to a pre-configured phone number or an USSD gateway when a pre-defined alarm condition has been met. With the aid of Ursalink Remote I/O Controller, the alarm condition brings attention to engineering personnel immediately. Also, it allows engineering personnel to trigger any relay outputs by sending out SMS/USSD message. The outputs can be connected with an alarm indication device, such as a light or a horn. The device can give immediate response to the status of both input and output conditions. A cellular modem is embedded in the Ursalink Remote I/O Controller.
2 digital inputs, connected with up to 2 DC signals
2 relay drivable outputs
Reliable performance with built-in watchdog
Automatically timing report of device condition via SMS/USSD
Customizable conditions & programmable actions
Editable alarm message
Status monitoring available and automatic switch of field devices at set times
Command with authorized number available
Sending and receiving message via SMS/USSD
50 O SMA Female
Opto-isolated depending on voltage, Can accept any DC signals of any type, including: Dry Contacts, DC Voltage (3 - 20V), High Voltage: +3V ~ +24V, Low Voltage:+1V max
2 x SPDT Relay Contact Rating: 3 Amp DC (Max: 30 V) or 3 Amp AC (Max: 250 V)
IO Connector type
DC Power Supply
Max: 1.6 W, Average: 0.56 W
-40°C to +70°C (-40°F to +158°F, reduced cellular performance above 60°C)