The MikroTik CRS112-8P-4S-IN is an eight Gigabit RJ45 port PoE switch, that offers different power output options: autosensing 802.3af/at PoE/PoE+ (Requires 48VDC Power Source - Sold Separately)
and Passive PoE, and four SFP ports provide optical fibre connectivity options to support uplinks of up to 1 Gbps.
CRS112-8P-4S-IN is equipped with 12 independent switching ports. 28 V 3.4 A power supply is already included in the box. There is secondary DC jack on the back of the enclosure that supports 48-57 V power supply (not included, can be purchased separately).
The CRS112-8P-4S-IN can power 802.3af/at devices if 48-57 V DC input is used (unit will automatically detect and provide correct power to devices). Max current is 1 A per port if input voltage is 18-28 V, 450 mA if 48-57 V. Total limit is [email protected]
and [email protected]
PoE-Out is passed over mode B 4,5 (+) and 7,8 (-) pins.
- Non-blocking Layer 2 switching capacity
- Supports up to 4K simultaneous VLANs
- Gigabit RJ45 Ports
- 4 SFP Ports
- Non-Blocking Throughput: 12 Gbps
- Switching Capacity: 24 Gbps
- Forwarding Rate: 17.8 Mpps
- Maximum Power Consumption: 10 W (without PoE devices connected)
- Supports PoE+ IEEE 802.3at/af and 24 V Passive PoE
- Quiet, Fanless Operation
|Details || |
|CPU nominal frequency||QCA8511|
|Size of RAM||128 MB|
|Storage size||16 MB|
|10/100/1000 Ethernet ports||8|
|PoE out||Yes, 802.3af/at|
|Supported input voltage||18 V - 57 V|
|Dimensions||200 x 142 x 44 mm|
|Operating system||RouterOS, level 5 license|
|Max power consumption||160 W|
|Max power consumption without attachments||10 W|
|Details || |
|Power Supply||28V 3.4A Power Adapter Included|
PoE (non standard) , PoE (802.3af/at)
There are yet no reviews for this product.
Please log in to write a review. Log in