Description
Specifications
Resources
Package Contents
The Teltonika TRB245 All-In-One Industrial M2M LTE Cat 4 Gateway is equipped with a GNSS receiver, Ethernet port and a durable 16 pin connector block. This Gateway board packs all the essential features for an industrial "all in one" package: secure power connector, I/O ports, serial communication, fast and a reliable internet connection. TRB245 can be used to integrate modern and legacy industrial equipment in one solution and with a wide range of software features such as SMS control, Firewall, open VPN, IPSec, RMS - Users can be assured that data can be reached quickly and securely.
Features
- LTE Cat 4 up to 150 Mbps
- Dual-SIM with auto Failover, Backup WAN and other SW features
- RS232/RS485 serial communication interfaces
- Multiple Inputs/Outputs for remote monitoring and control
- Wide range of power supply voltages 9 - 30V
- Teltonika Remote Management System compatible
| Details | |
|---|---|
| Product code | TRB245 |
| Mobile | 4G (LTE) – Cat 4 up to 150 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps |
| SIM | Dual SIM with auto-switch |
| Serial Communication Modes | Console, OverIP, Modem (planned), Modbus RTU master, Modbus gateway, Modbus Slave, NTRIP client (planned) |
| Monitoring and Management | Web UI, FOTA, SSH, SMS, JSON-RPC, Modbus, RMS |
| CPU | Qualcomm QCA9531, MIPS 24kc, 650 MHz |
| RAM | 64 MB, DDR2 |
| Flash | 16MB SPI Flash (4 MB available for user) |
| Operating System | RutOS (OpenWrt based Linux OS, SDK package with build environment provided) |
| I/O | 3 x Configurable Inputs/Outputs. Digital input 0 - 6 V detected as logic low, 8 - 30 V detected as logic high. Open collector output, max output 30 V, 300 mA, 1 x Analog input (0 - 30 V), I/O juggler (Allows to set certain I/O conditions to initiate event) |
| Serial | RS232 (TX, RX, RTS, CTS), RS485 (D+, D-, R+, R- (2 or 4 wire interface) |
| Power | 2 pins in 16 pin industrial terminal block |
| Input voltage range | 9 – 30 VDC, reverse polarity protection, surge protection +/-1 kV 50 µs max |
| Casing | Aluminium housing |
| Dimensions | 83 x 25 x 74 mm |
| Mounting Options | DIN rail, wall mounting (additional kits needed), flat surface placement |
| Operating Temperature | -40 ? to 75 ? |
| Operating Humidity | 10% to 90% non-condensing |
| Details | |
|---|---|
| Power Supply | 9V 1A AC/DC Plug Pack with 4pin, 3mm pitch connector |
| Antenna | 1 x LTE antenna (swivel SMA male), 1x GNSS antenna (adhesive, SMA male, 3 m cable) |
| Cables | LAN cable (1.5m) |
| Manual | QSG (Quick Start Guide) |
| I/O | 16 pin terminal block |
GPS/GNSS
100Mbps
RJ45 , SMA
600-999MHz , 1700-2100MHz
There are yet no reviews for this product.
Please log in to write a review. Log in
Related Products
