Teltonika RUT976 5G RedCap Cellular Router with Wi-Fi, GNSS and Serial interfaces

$695.00 +GST
Login for your price
10 In Stock
SKU: RUT976
QuantityPrice
1 - 4$695.00
5 - 9$677.63
10 - 19$660.25
20+$625.50
Teltonika RUT976 5G RedCap Cellular Router with Wi-Fi, GNSS, RS232, RS485 and multiple I/Os
Warranty
Same day dispatch for orders placed before 3pm (NZDT), Free shipping on all orders $1000+GST*
Supported Platforms
Teltonika RMS
Description
Specifications
Resources
Package Contents
Teltonika RUT976 5G RedCap Cellular Router with Wi-Fi, GNSS, RS232, RS485 and multiple I/Os

The RUT976 is an industrial Redcap 5G router supporting SA architecture, carving a balanced niche between traditional 4G and full-capacity 5G. This 5G router can wirelessly support up to 100 end devices and features the low latency of 5G—at affordable pricing. In case of limited 5G coverage, the RUT976 is backward compatible with 4G LTE Cat 4. It also boasts dual SIM slots with auto-failover, Wi-Fi, GNSS, a wide range of interfaces, including four 10/100 RJ45 slots, RS232, RS485, and multiple I/Os, and numerous other brilliant features for expert professional deployment

Features
  • REDCAP 5G Low latency, high capacity, affordable pricing
  • Backward compatible with 4G LTE Cat 4
  • DUAL-SIM With auto-failover, backup WAN and other switching scenarios
  • Multiple interfaces including Ethernet, RS232, RS485, & multiple I/Os
Details
Product codeRUT976000200
Mobile module5G Sub-6Ghz SA 223 Mbps DL , 123 Mbps UL; 4G LTE Cat 4 – LTE 195 Mbps DL, 105 Mbps UL
3GPP ReleaseRelease 17 RedCap
Bands5G NR SA: n1, n2, n3, n5, n7, n8, n12, n13, n14, n18, n20, n25, n26, n28, n30, n38, n40, n41, n48, n66, n70, n71, n77, n78, n79; 4G (LTE-FDD): B1, B2, B3, B4, B5, B7, B8, B12, B13, B14, B17, B18, B19, B20, B25, B26, B28, B30, B66, B70, B71; 4G (LTE-TDD): B34, B38, B39, B40, B41, B42, B43, B48
SIM switch2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection
StatusIMSI, ICCID, operator, operator state, data connection state, network type, bandwidth, connected band, signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, data sent/received, LAC, TAC, cell ID, ARFCN, UARFCN, EARFCN, MCC, and MNC
SMSSMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP
USSDSupports sending and reading Unstructured Supplementary Service Data messages
APNAuto APN
BridgeDirect connection (bridge) between mobile ISP and device on LAN
PassthroughRouter assigns its mobile WAN IP address to another device on LAN
Wireless mode802.11b/g/n (Wi-Fi 4), Access Point (AP), Station (STA)
RoutingStatic routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy based routing
Network protocolsTCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake on Lan (WOL), VXLAN
VoIP passthrough supportH.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
Connection monitoringPing Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection
FirewallPort forward, traffic rules, custom rules
CPUMediatek, 580 MHz, MIPS 24KEc
RAM128 MB, DDR2
FLASH storage32 MB, NOR Flash
GNSSGPS, GLONASS, BeiDou, Galileo and QZSS
RS232DB9 connector, RS232 (with RTS, CTS flow control)
RS485RS485 Full Duplex (4 wires) and Half Duplex (2 wires). 300-115200 baud rate
Serial functionsConsole, Serial over IP, Modem, MODBUS gateway, NTRIP Client
USB Data rateUSB 2.0
Input1 x digital dry input (0 - 3 V), 1 x digital galvanically isolated input (0 - 30 V), 1 x analog input (0 - 24 V), 1 x Digital non-isolated input (on 4-pin power connector, 0 - 5 V detected as logic low, 8 - 30 V detected as logic high)
Output1 x digital open collector output (30 V, 250 mA), 1 x SPST relay output (40 V, 4 A), 1 x Digital open collector output (30 V, 300 mA, on 4-pin power connector)
EventsEmail, RMS, SMS
I/O jugglerAllows to set certain I/O conditions to initiate event
SD CardMicro SD (internal)
Power consumptionIdle: < 3 W, Max: < 7 W
Ethernet4 x RJ45 ports, 10/100 Mbps
I/O’s2 x Inputs and 2 x Outputs on 10-pin industrial socket, 1 x Digital input and 1 x Digital output on 4-pin power connector
Status LEDs1 x Bi-color connection status, 5 x Mobile connection strength, 4 x ETH status, 1 x Power
SIM2 x SIM slots (Mini SIM - 2FF), 1.8 V/3 V, external SIM holders, eSIM (Optional - different hardware required; contact your sales manager)
Power1 x 4-pin power connector
Input/output1 x 10-pin industrial socket for inputs/outputs
Antennas2 x SMA for Mobile, 2 x RP-SMA for Wi-Fi, 1 x SMA for GNSS
USB1 x USB A port for external devices
RS2321 x DB9 socket
RS4851 x 6-pin industrial socket
ResetReboot/User default reset/Factory reset button
Casing materialAluminum housing, plastic panels
Dimensions (W x H x D)110 x 50 x 100 mm
Weight295 g
Mounting optionsDIN rail, wall mount, flat surface (all require additional kit)
Operating temperature-40 °C to 75 °C
Operating humidity10% to 90% non-condensing
Ingress Protection RatingIP30
RegulatoryWEEE
Details
IncludesRUT976 router, 9 W PSU, 2x 5G Mobile antennas (swivel, SMA male), 2x Wi-Fi antennas (magnetic mount, RP-SMA male, 1.5 m cable), GNSS antenna (adhesive, SMA male, 3 m cable), RS485 connector block, I/O connector block, Ethernet cable (1.5 m), SIM Adapter kit, QSG (Quick Start Guide)
Teltonika RMS
100Mbps
5G , Wi-Fi 4 , GPS/GNSS
Contact , Data Logger , Tracker
DB9 , RJ45 , RP-SMA , SMA , USB
600-999MHz , 1700-2100MHz , 2.4GHz
PoE (non standard)

There are yet no reviews for this product.

Please log in to write a review. Log in