Mimosa B5 5GHz 4x4:4 802.11ac 25dBi Backhaul Radio
Mimosa B5 5GHz 802.11ac Integrated 25dBi Antenna Backhaul Radio
2.4GHz , 5GHz
The Mimosa B5 Point to Point wireless Backhaul is changing the game. Leveraging 802.11ac, 4x4:4 MIMO and radical engineering for service providers that demand the same capacity, speed and reliability as fiber. With 1.7 Gbps PHY and a unique spin on reliability, the Mimosa B5 is re-defining gigabit wireless technology. The B5 is capable of 1 Gbps throughput, a low 2 ms latency and has an integrated dual-polarized antenna with 25 dBi of gain. Ready to handle the next wave of 5 GHz, the B5 is operational from 5150-5850 MHz. The Mimosa B5 brings with it an entirely new set of features never seen before in the outdoor wireless market.
- Supports Single or Dual 20/40/80 MHz channels which revolutionizes backhaul reliability by load balancing across two non-contiguous channels to avoid outages due to interference. If one channel experiences interference the radio maintains connection while simultaneously searching for new replacement channel.
- Wireless interference can change in an instant, and your network needs to adapt. The Mimosa B5 offers constant spectrum analysis with historical and real-time data to dynamically make smarter decisions dynamically.
- The Auto Everything feature will automatically adjust frequency, channel width and power levels based on environmental feedback. This feature can be turned off for users that prefer more control.
- With scarce spectrum and lots of traffic to transmit, colocation of devices is a must. While this has been a constant struggle for most of the products on the market, the B5 takes an advanced approach. Using standard GPS and GLONASS for sync, we can ensure that all radios on the network are transmitting and receiving at the same time to avoid any interference. For even more protection, we use the most advanced RF isolation on the market, allowing radios to operate in close proximity to one another.
|Manufacturer's Product Code||B5|
|Frequency Range||5150-5850 MHz restricted by country of operation (U-NII 2 US FCC certification pending)|
|Antenna Gain||25 dBi|
|Polarisation||Dual-Linear (horizontal & vertical)|
|Cross Polarisation||>20 dB or better|
|Max Output Power||30 dBm (2-stream), 27 dBm (4-stream)|
|Vertical Beamwidth||8 deg.|
|Horizontal Beamwidth||8 deg.|
|Dimensions||Diameter: 442 mm (17.4"), Depth: 362 mm (14.3") with bracket|
|Radome Enclosed||Single enclosure with radome|
|Wind Loading||39 kg @ 160 km/h (86 lbs @ 100 mph)|
|Pole Mount Diameter||Pole mounting kit included for 30mm (1.18") to 90mm (3.54") OD pipes|
|Power Input||802.3at compliant|
|Max Power Consumption||20W|
|Operating Temperature||-40°C to +55°C (-40°F to 131°F)|
|GPS||GNSS-1 (GPS + GLONASS)|
|Collocation Synchronization||1PPS GPS TX/RX synchronization for colocated co-channel radios, Adjustable up/downstream bandwidth ratio|
|Management||Mimosa cloud monitoring and management SNMPv2 & Syslog legacy monitoring HTTPS HTML 5 based Web UI 2.4 GHz 802.11b/g/n radio for local management access|
|Security||128-bit AES PSK with hardware acceleration|
|Power Supply||56V Power over Ethernet supply with IEC61000-4-5 surge protection|
|Pole Mount||Yes, Pole mounting kit included for 30mm (1.18") to 90mm (3.54") OD pipes|
|Warranty||Standard 12 Month RTB|