PMP 450b High-Gain Subscriber Module - (Sold in 4-Pack)
5 GHz 450b - High-Gain WB SM – 4-pack
PoE (non standard) , PoE (802.3af/at)
PMP 450b High-Gain Subscriber Module - (Sold in 4-Pack Kits) Cambium Networks PMP 450 platform increases performance with the addition of the PMP 450b High-Gain Subscriber Module. How does the PMP 450b High-Gain Subscriber Module differ from the 450 or 450i SM? The 450b has the same packet processing capability as the 450i, which means (for typical traffic patterns) it can process the entire AP capacity. In a 20 MHz channel at 256 QAM (8x) modulation, it is capable of 125 Mbps aggregate throughput; and in a 40 MHz channel, it is capable of greater than 250 Mbps. Due to limitations of the packet processing on the 450 SM, the maximum capacity of these devices was lower. With the high gain antenna, this is the most capable SM to date.
- Integrated 24 dBi reflector dish
- An ultra-wide band radio supports 4900 MHz to 5925 MHz.
- Gigabit Ethernet Interface provides the maximum transfer rates to the device.
- 3.5 mm audio jack allows direct connection of headphones without any adapters.
- IP 67 environmental protection.
- Capable of >250 Mbps aggregate in a 40 MHz channel.
- Sold in 4-pack kits only
|Output Power||+27 dBm|
|Channel Width||5 / 10 / 15/ 20 / 30 / 40 MHz|
|Frequency Range||4900 - 5925 MHz|
|Protocols Used||IPv4, UDP, TCP, IP, ICMP, Telnet, SNMP, HTTP, FTP|
|Network Management||HTTP, HTTPS, Telnet, FTP, SNMP v2 and v3|
|Interfaces||(1) 100/1000BaseT, full duplex, rate auto negotiated, 802.3 compliant|
|Temperature Range||-40°C to +60°C (-40°F to +140°F)|
|PoE In||20 - 32V|
|Max Power consumption||12 W Maximum, 9 W Typical|
|Number of chains||2x2 MIMO/OFDM|
|Wind Loading||190 km/hour|
|Pole Diammeter||6.4 cm - 7.6 cm (2.5 in - 3 in)|
|Dimensions||47 cm x 28 cm|
|Power Supply||3 Pin Clover Lead|
|Pole Mount||Yes, Included|
|Warranty||Standard 12 Month RTB|