| Product code | RUTC40000400 |
| Mobile Module | 4G LTE Cat 4 up to 150 DL/50 UL Mbps; 3G up to 42 DL/5.76 UL Mbps; 2G up to 236.8 DL/236.8 UL Kbps |
| 4G (LTE-FDD) | B1, B3, B5, B7, B8, B20, B28 |
| 4G (LTE-TDD) | B38, B40, B41 |
| 3G Bands | B1, B8 |
| 2G Bands | B3, B8 |
| eSIM | Consumer type eSIM, profile download and removal operations, up to 7 eSIM profiles; does not include data plans |
| 3GPP Release | Release 10 |
| SIM Switch | 2 SIM cards and 1 eSIM, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection |
| Mobile Status Parameters | Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, Bytes sent/received, connected band, IMSI, ICCID, SIM provider, operator, network type, cell ID, LAC, TAC, ARFCN, UARFCN, EARFCN |
| SMS | SMS status, SMS configuration, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP |
| USSD | Supports sending and reading Unstructured Supplementary Service Data messages |
| Operator Block/Allow List | Operator block/allow list (by country or separate operators) |
| Multiple PDN | Possibility to use different PDNs for multiple network access and services |
| Band Management | Band lock, Used band status display |
| SIM Idle Protection Service | Provides the possibility to configure the router to periodically switch to the unused SIM card and establish a data connection in order to prevent the SIM card from being blocked |
| SIM PIN Code Management | SIM PIN code management enables setting, changing, or disabling the SIM card's PIN |
| APN | Auto APN |
| Bridge Mode | Direct connection (bridge) between mobile ISP and device on LAN |
| Passthrough | Router assigns its mobile WAN IP address to another device on LAN |
| Wireless Mode | 802.11b/g/n/ac/ax (Wi‑Fi 6) with data transmission rates up to 2402Mbps on 5GHz, 576Mbps on 2.4GHz (Dual Band, MU‑MIMO) |
| Wi‑Fi Security | WPA2‑Enterprise: PEAP, WPA2‑PSK, WPA‑EAP, WPA‑PSK, WPA3‑SAE, WPA3‑EAP, OWE; AES‑CCMP, TKIP, Auto‑cipher modes, client separation, EAP‑TLS with PKCS#12 certificates, disable auto‑reconnect, 802.11w Protected Management Frames (PMF) |
| SSID/ESSID | SSID stealth mode and access control based on MAC address |
| Wi‑Fi Users | Up to 512 simultaneous connections |
| Wireless Connectivity Features | Wireless mesh (802.11s), fast roaming (802.11r), BSS transition management (802.11v), radio resource measurement (802.11k) |
| Wireless MAC Filter | Allowlist, blocklist |
| Wireless QR Code Generator | Once scanned, a user will automatically enter your network without needing to input login information |
| WAN Port | 1 x WAN port 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover |
| LAN Ports | 4 x LAN ports, 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover |
| CPU | Mediatek, Dual-core, 1.3 GHz, ARM Cortex A53 |
| RAM | 1 GB, DDR4 |
| Flash Storage | 16 MB serial NOR flash, 8 GB eMMC Flash |
| Power Connector | 4‑pin industrial DC power socket |
| Input Voltage Range | 9 – 50 VDC, reverse polarity protection, voltage surge/transient protection |
| PoE (Passive) | Possibility to power up through LAN1 port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards, Mode B, 9 – 50 VDC |
| Power Consumption | Idle: < 5.6 W, Max: < 24 W |
| Mounting Options | DIN rail, wall mount, flat surface (all require additional kit) |
| Operating Temperature | -40 °C to 65 °C |
| Operating Humidity | 10% to 90% non‑condensing |
| Ingress Protection Rating | IP30 |
| Casing Material | Anodized aluminium housing and panels |
| Dimensions (W x H x D) | 130.4 x 42.6 x 104 mm |
| Weight | 480 g |