Cambium 3 GHz PMP 450b High Gain Subscriber Module (Radio Only)

Same day dispatch for orders placed before 3pm (NZDT), Free shipping on all orders $1000+GST*

Supported Platforms

Description

Description

Specifications

Resources

Package Contents

The Cambium C030045B021 is a 3 GHz, PMP 450b High Gain Subscriber Module (Radio Only).

The PMP 450 platform has proven to be the most scalable and highest capacity multipoint platform on the market. Featuring massive MU-MIMO and beamforming along with a host of advanced features, PMP 450 is the choice of the most demanding operators, and is now available for use in CBRS.

Note: this is the radio component only, power supplies (N000900L001) and antenna assemblies (N030045D001) are sold separately.

Features

PMP450b Operates in the licensed 3 GHz band
Ultra-wide band radios supporting 3.3 GHz to 3.9 GHz
Capable of up to 300 Mbps aggregate in a 40 MHz channel
Can function as a Point-to-Point (PTP) link or as a Subscriber Module (SM)
Gigabit Ethernet Interface provides the maximum transfer rates to the device
CBRS CBSD Category B device
3.5 mm audio jack allows direct connection of headphones for alignment without any adapters
New System on a Chip (SoC) enhances Packet Processing

Details
Manufacturer's Code	C030045B021B
Channel Spacing	Configurable on 500 KHz increments
Frequency Range	3300 - 3900 MHz
Channel Width	5 / 7 / 10 / 15 / 20 / 30 or 40 MHz
MAC (Media Access Control)	Layer Cambium Networks proprietary
Physical Layer	2x2 MIMO OFDM
Ethernet Interface	100/1000 BaseT, full duplex, rate auto negotiated, 802.3 compliant
Protocols Used	IPv4, IPv6, UDP, TCP/IP, ICMP, Telnet, SNMP, HTTP, FTP
Network Management	IPv4/IPv6 (dual stack), HTTP, HTTPS, Telnet, FTP, SNMPv2c and v3, Cambium Networks cnMaestro
MTU	1700 bytes
VLAN	802.1ad (DVLAN Q-inQ), 802.1Q with 802.1p priority, dynamic port VID
PPS	50,000
Latency	3 - 5 ms, typical
GPS Synchronization	Yes, synchronized by Access Point or via 3.5mm port using cnPulse (for PTP mode)
Mean Time Between Failure	> 40 Years
Environmental	IP55; Optional glands to enhance to IP67 - Part number N000000L135A
Temperature / Humidity	-40°C to 60°C (-40°F to 140°F), 0-95% non-condensing
Power Consumption	12 W typical, 15 W peak
Input Voltage	20-32 VDC, Canopy-style PoE
Transmit Power Range	56 dB dynamic range (to EIRP limit by region) (1 dB step)
Maximum Transmit Power	+29 dBm (MIMO, combined polarities)