Ignite Net MetroLinq Product Portfolio

60 GHz MetroLinq

technology advantages

IgniteNet MetroLinq offers the highest amount of product options in terms of capacity and distance. Customers can choose from powerful 10 Gigabit base station to a small form factor MetroLinq LW links reaching 2 Gbps capacity over short 150 m distances. The longest link deployed using MetroLinq products was done in Arizona transmitting 800 Mbps over a 2.5 km (1.5 mi) 60 GHz wireless link.

Over 7 GHz of noise-free spectrum

Over 7 GHz of noise-free spectrum A massive amount of noise free spectrum (7 – 14 GHz*) makes the 60 GHz band ideal for high throughput point-to-point and point-to-multipoint applications. The demand for increased bandwidth grows every day as commonly used licensed and unlicensed frequencies become over saturated, making it difficult to deploy high speed, low-latency wireless links. *Country dependent

High-gain but small form factor

High frequency antennas are much smaller in size and have higher gains when compared to the same sized lower frequency antennas. 60 GHz devices therefore will not overcrowd your poles, rooftops or towers. When installed in residential applications, MetroLinq devices are also less easily noticed by home owners.

Highly secure and great for frequency re-use

The 60 GHz band is characterized as being highly affected by oxygen absorption which means signals transmitted from a 60GHz radio will not travel as far as other frequencies. Frequency re-use makes the products ideal not only for open rural areas, but also dense urban deployments. In addition, colocation of multiple units on a single tower is possible due to narrow beamwidths which are achieved through both high gain directional antennas as well as focused beamforming technology. These advantages show that 60 GHz products avoid the self-interference issues typically seen within other frequencies, and ensure increased security of your multi-gigabit wireless links.

Integrated 5 GHz failover

Because 60 GHz radio waves are affected by rain, IgniteNet MetroLinq products have a built-in 5 GHz radio that works as a failover. This backup mechanism seamlessly changes the frequency as needed for robust operation in any climate or rain zone.

LinqPath – 60 GHz link calculator

The LinqPath tool allows you to estimate the throughput and max distance of your 60 GHz links under different weather conditions (different ITU rain rates) at multiple link availability rates (from 99% to 99.999%). This tool is available within the IgniteNet Cloud controller and only requires initial registration for use.
LinqPath Calculator Tool
Cloud Based Controller

Cloud-based controller

IgniteNet MetroLinq devices can optionally be configured and monitored using the IgniteNet Cloud controller. The IgniteNet Cloud is an ideal solution for building and monitoring large-scale deployments consisting not only of 60 GHz MetroLinq devices, but also IgniteNet cloud-managed Wi-Fi and switch products. Remote access saves time when troubleshooting remote links, saves operational costs, and increases customer satisfaction. A free trial plan, with a two-device maximum, is available to test functionality and performance.
Tools app
Tools Scope

Tools simplifying setup

IgniteNet offers a variety of tools to simplify the the deployment process of narrow-beam 60 GHz MetroLInq devices. An external Bluetooth USB dongle is available to give your MetroLinq device the ability to communicate aiming data with the IgniteNet LinqAssist mobile app running on your mobile device. An alignment scope can also be used to help more accurately align your MetroLinq devices during initial deployment.

Applications

Fixed wireless access (5G)

Fixed wireless access (5G)

60 GHz wireless is ideal for fiber-like wireless deployments and is great alternative to fiber in terms of speed and cost. MetroLinq products operating in point-to-point and point-to-multipoint scenarios make it easy to connect new customers to existing fiber or wireless networks. Multi-gigabit connectivity over wireless is now possible and extremely affordable - enabling Internet service delivery for residential and business customers in both urban and suburban areas.
Enterprise networks

Enterprise networks

High bandwidth, low latency, and low interference are all important characteristics when building successful enterprise wireless networks. MetroLinq products can be used to quickly extend fiber networks to nearby areas as well as extend internal networks to remote locations. Using the MetroLinq product line, both private and governmental enterprises can securely build multi-gigabit networks and cater to the increasing demands for high speed connectivity.
Wireless backhaul

Wireless backhaul

MetroLinq 60 GHz mmwave products are ideal as wireless backhauls to a variety of networks: small cell (mobile), public Wi-Fi, campus connectivity, ISPs, and more. The 60 GHz band has no interference compared to the other available unlicensed bands (2.4 and 5 GHz), which are crowded due to Wi-Fi access deployments and growing IoT networks. High capacity, security, and frequency re-use with co-location are the key features of mmwave product deployments that create future-proof fiber-like wireless backhaul networks.
Security and surveillance

Security and surveillance

When building mission-critical security networks, the risk of connectivity issues must be eliminated. MetroLinq 60 GHz mmwave products are an ideal solution for dense metropolitan networks as they keep up with an increasing data demand from the growing IP camera market. MetroLinq products are also able to provide fiber-like connectivity and ensure carrier-grade security of data being transmitted throughout the network - no matter if it is video, internet services, or IoT sensor data.

Full 802.11ac Wave2 product lineup

IgniteNet offers a range of access-points suitable for any size deployments, from small home offices to large enterprise projects needing to connect large numbers of subscribers and transmit Gigabits of data.
Ignite Net MetroLinq Product Portfolio

802.11ac Wave2 – a must-have for next generation networks

High Capacity

High capacity

MU-MIMO

MU-MiMo

Hardware based acceleration

Hardware based acceleration

Ever-increasing data consumption drives the need for high-speed internet connectivity. High capacity MU-MiMo and hardware-based acceleration enable IgniteNet Cloud-managed W-Fi access points to deliver high-capacity throughput to many simultaneous clients. Multi user MiMo and ultra-high data rates (up to 2.6Gbps over the air) are hallmark features of Wave2 that enable this future growth.

Powerful and affordable Cloud-controller

IgniteNet’s Cloud controller is a great platform for managing networks built using IgniteNet products. Remote access to your network’s devices and informative statistical data allow network administrators to remotely troubleshoot problems. This can dramatically decrease operational expenses and increase customer satisfaction rates due to quick problem resolution. The Cloud also gives Managed Service Providers (MSPs) an opportunity to enter new markets desiring Wi-Fi connectivity but lacking the internal IT staff to set it up. The ultra-low cost of 99 USD per year, intuitive user interface, and zero-maintenance requirements are the key differentiators when customers are choosing IgniteNet Cloud-managed Wi-Fi products.
Powerful and affordable Cloud-controller
 IgniteNet Marketplace

IgniteNet Marketplace

IgniteNet is taking a new approach to managed Wi-Fi by opening up a marketplace within the IgniteNet Cloud platform. Multiple “over the top” applications are available in the marketplace that enable customers to monetize and secure their Wi-Fi networks, enable music streaming, setup up LTE backup, and many more. Service providers are one click away from creating new unique services for their customers as well as additional revenue streams for their business.

Applications

Fixed wireless access (5G)

Enterprise Wi-Fi

IngniteNet’s Cloud-managed Wi-Fi solutions are a great choice for enterprise Wi-Fi deployments. Low cost, easy installation, and intuitive configuration UIs are perfect for small SOHO networks. The more advanced features make sense for large multi-site corporations requiring flexible management and access to remote networks from anywhere in the world. Multiple access point models also ensure there is a device to fill the needs of any size or type of deployment. 802.11ac Wave2 technology makes it possible to support large numbers of concurrent subscribers and caters to the needs of the most resource demanding applications.
Enterprise networks

Hotspot networks

IgniteNet Wi-Fi is a great option for building hotspot networks both indoor and outdoor. Universal access points with IP-55 rated enclosures (Spark W2 and SunSpot W2) simplify logistics and deployment as the same model can operate in indoor and outdoor environments. Multiple external captive portal applications are available as easy-to-setup add-ons from the Cloud-controller (Black BX, Cloud4Wi, for example). These add-ons allow you to cater the needs of different industries including retail, hospitality, and many more. Additionally, IgniteNet MetroLinq products are a great compliment for building reliable multi-gigabit backhaul for your hotspot networks.
Wireless backhaul

Hospitality

A stable internet connection is an essential part of a customer’s experience in the hospitality market, no matter if that location is a small bed and breakfast, or a large worldwide hotel chain providing conference and event-hosting services. Great performance and low total cost of ownership make the IgniteNet Cloud-managed Wi-Fi solution ideal for this market. Centralized management and monitoring also allows easy expansion and simplifies monitoring and remote troubleshooting. This decreases OPEXs, shortens the troubleshooting time, and increases customer satisfaction. Multiple applications are also available via the IgniteNet Cloud-controller marketplace to compliment basic connectivity. These applications offer services for comprehensive Wi-Fi analytics, various Wi-Fi marketing options, and high-end security features. All of these options create additional value and improve customer satisfaction rates.
Fixed wireless access (5G)

Service provider and operator Wi-Fi

Increasing demands for high-speed connectivity mean users expect an enterprise level quality of service, even for residential applications. Solid coverage and the ability to maintain simultaneous high-speed connections to multiple devices are the key factors to satisfy these expectations. IgniteNet Wi-Fi devices check these boxes for both operators and WISPs. In addition, remote management and monitoring via the IgniteNet Cloud simplifies supervision and maintenance of these devices. The IgniteNet Add-on marketplace further extends the value for residential Wi-Fi users by enabling optional parental controls through the Family Zone application, or aiding the installation of video surveillance cameras through the SMC Secure Watch application. Low cost and great performance make the new 802.11ac Wave2 cloud-managed Wi-Fi products a perfect choice for residential deployments.
Enterprise networks

Managed service providers (MSPs)

The IgniteNet managed Wi-Fi solution gives service providers the opportunity to offer managed Wi-Fi services to enterprise customers who don’t have a dedicated IT staff. The cloud-based controller makes configuration easy, and enables monitoring and troubleshooting of remote networks from anywhere in the world. The simple licensing structure (99 USD per year for unlimited devices) makes it a hassle free solution. With IgniteNet, MSPs can enable their customers, like retail stores, offices, hotels, and others to concentrate on their main business activities while enjoying fast, secure, and reliable Wi-Fi connectivity.
Wireless backhaul

Education

Today’s education system requires robust Wi-Fi connectivity in order to cater the needs of resource-demanding applications, such as video streaming in a classroom to many simultaneously connected student devices, serving a high number of users during breaks and events, and ensuring the security of the network. IgniteNet’s Wi-Fi products paired with the cloud-based controller are a perfect fit for building networks in schools and campuses. One of IgniteNet’s marketplace applications, Familiy Zone, allows customers to run an extensive security and content filtering platform on top of IgniteNet access points. IgniteNet MetroLinq devices are also a practical option to deploy along side Wi-Fi APs for school or campus video surveillance backhaul in order to keep the 2.4 and 5 GHz frequencies open for Wi-Fi access and transmission of mission critical data.