For powering off of 18-36V DC / Solar we recommend the Tycon TP-DCDC-2456GD-VHP as a suitable injector.
- 450 Mbps aggregate throughput
- Dynamic Spectrum Optimization (continual self-optimization to avoid interference)
- Supper high 850,000+ packets per second
- Extensive QOS supporting up to 8 Queues
- FIPS-197 128/256-bit AES encryption
- IEEE 1588v2 and Synchronous Ethernet (SyncE)
- IPv6/IPv4 dual-stack management support
- Ingress Protection rated (IP66/67) protective aluminum radio enclosures
- Supports 802.3at (Alternative A) POE Input on Gigabit Port 1
| Details | |
|---|---|
| Manufacturer's Code | C050067B004C |
| Output Power | Up to 27 dBm |
| Channel Width | 5, 10, 15, 20, 30, 40, and 45 MHz channels |
| Frequency Range | Wide-band operation 4.9 to 6.05 GHz (Allowable frequencies and bands are dictated by individual country regulations) |
| Network Management | In-band and out-of-band management (OOBM) |
| Interfaces | 2 x Gigabit Ethernet copper ports: Gigabit Port 1: Data + PoE power input; Gigabit Port 2: 802.3at PoE output port |
| Temperature Range | -40° to +140° F (-40° to +60° C), including solar radiation |
| Antenna gain dBi | 23 dBi |
| Max Power consumption | 30 W maximum (up to 70 W with 802.3at device on auxiliary port) |
| Dimensions | 305mm (12”), Height 305mm (13.5”), Depth 81mm (3.2”) |
| IP Rating | IP66 and IP67 |
| Wind Speed Survival | 200 mph (322 kph) |
| Spectral Efficiency | 10 bps/Hz maximum |
| Details |
|---|
































































































