Teltonika NTP001 NTP server

Same day dispatch for orders placed before 3pm (NZDT), Free shipping on all orders $1000+GST*

Description

Description

Specifications

Resources

Package Contents

Teltonika NTP001 NTP server

The NTP001 is a stratum-1 Teltonika NTP server designed for synchronizing accurate, UTC-traceable time in both public and private networks, without the need of Internet access. Utilising its GNSS capabilities, this low-cost NTP server maintains precise, UTC-traceable time. Plug-and-play functionality, a wide variety of interfaces including RS232 and RS485, and a robust security profile all make the NTP001 the perfect NTP server for your network.

Features

Accurate & low-cost NTP server
Multiple Interfaces featuring RJ45, RS232, RS485 & I/Os
PLUG-AND-PLAY Simple installation & configuration at minimum effort

Details
Product code	NTP001
Supported modes	Server - Receive time from GPS and act as a NTP server to broadcast time for other devices (Stratum 1). Broadcast time through UDP or over Serial (RS232, RS485)
Daytime Protocol	TCP/UDP
Date over Serial	RS232/RS485
NTP	NTPv4, NTP authentication (MD5/SHA1), Unicast/Multicast/Broadcast mode
Protocol	NTP Stratum 1 Time Server (NTPv4)
NTP Accuracy	Ethernet NTP ±1ms overall
NTP Performance	>300 NTP requests per second (wire speed)
Synchronization Accuracy	LAN synchronization typically 1–10ms
Acquisition Sensitivity	Acquisition Sensitivity -146 dBm, Reacquisition Sensitivity -157 dBm, Tracking Sensitivity -157 dBm
Time Source	GPS 1575.42 ±1.023 MHz, GLONASS 1597.5–1605.8 MHz, Galileo 1575.42 ±2.046 MHz, BDS 1561.098 ±2.046 MHz
Startup	Cold GPS acquisition in <120 seconds
CPU	Mediatek, 580 MHz, MIPS 24KEc
RAM	128 MB, DDR2
FLASH storage	16 MB, NOR Flash
LAN	1 x LAN port, 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
Network protocols	TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SSL/TLS, ARP, SSH, DHCP, SNMP, MQTT
Connection monitoring	Ping Reboot, Wget Reboot, Periodic Reboot
Network topology	Visual representation of your network, showing which devices are connected to which other devices
Authentication	Pre-shared key, digital certificates, X.509 certificates, TACACS+, Internal & External RADIUS users authentication, IP & login attempts block, time-based login blocking, built-in random password generator
WEB filter	Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only
Access control	Flexible access control of SSH, Web interface, CLI and Telnet
802.1x	Port-based network access control client
MODBUS Supported modes	Server, Client
Supported connection types	RTU (RS232, RS485), TCP
Custom registers	MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Client functionality
Supported data formats	8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII
Modbus MQTT Gateway	Allows sending commands and receiving data from MODBUS Server through MQTT broker
Serial RS232	Terminal block connector: TX, RX, RTS, CTS
RS485	Terminal block connector: D+, D-, R+, R- (2 or 4 wire interface)
Input	3 x Digital Input, 0 - 6 V detected as logic low, 8 - 30 V detected as logic high
Output	3 x Digital Output, Open collector output, max output 30 V, 300 mA
Power Connector	2-pin in 16-pin industrial terminal block
Input voltage range	9 - 30 VDC, Overvoltage protection, Reverse polarity protection, Surge protection +/- 1kV 50 uS Max
Power consumption	Idle: < 2 W, Max: < 3.5 W
I/O’s	3 x Configurable I/O, 1 x Analog input in 16-pin terminal block
Status LEDs	1 x Power, 2x GNSS status LEDs, 1x NTP Server status LED, 3 x IO status LEDs
Power	1 x 16-pin terminal block
Antennas	1 x SMA for GNSS
Casing material	Anodized aluminum housing and panels
Dimensions (W x H x D)	82.6 x 25 x 83 mm
Weight	180 g
Mounting options	DIN rail, wall mount, flat surface (all require additional kit)
Operating temperature	-40 °C to 75 °C
Operating humidity	10% to 90% non-condensing
Ingress Protection Rating	IP30
Regulatory	CE, UKCA, CB, UCRF, EAC, WEEE