The AL-CAT6W Lightning Protector provides superior lightning and surge protection with improved frequency response for both indoor and outdoor 10/100/1000 Gigabit Ethernet networks. The unit meets or exceeds CAT6 performance for the four data pairs. The design uses high frequency transmission line layout techniques to maintain an optimum 100 ohms balanced impedance in the signal path. These techniques and the use of Ultra-Low Capacitance Protection Arrays provide superior high frequency response and improved return loss for the data pairs. In addition, the unit is compatible with 802.3af Power-over-Ethernet (PoE) devices. Integral to the design is protection for the two Ethernet data pairs and the PoE DC power feed. This unit supports normal and reverse polarity PoE. This CAT6 Lightning Protector is compatible with Wireless Access Points, Access Servers and Outdoor Routers, with or without Power-over-Ethernet (PoE) functionality. When using Motorola®/Orthogon equipment, the AL-CAT6W is an ideal alternative to Transtector® protectors. This unit features a weatherproof ABS enclosure with gasketed cover and concealed mounting holes. Removable Terminal Strips are provided on the input and output for convenience. To ease installation, the terminal strips can be removed. A ground clamp provides a tie point for earth ground. For maximum protection from lightning on long cable runs, two units can be used, one at each end of the cable.
- CAT6, CAT5e and CAT5 compatible
- 10/100/1000 Base-T Gigabit Ethernet protection
- Power-Over-Ethernet (PoE) compatible
- Gasketed cover, concealed mounting holes & ground clamp provided on outside of enclosure
- Cisco® Reverse Polarity PoE and Motorola®/Orthogon™ compatible
|Details || |
|Manufacturer's Product Code||AL-CAT6W|
|Connector Type 1||Terminal Block|
|Connector Type 2||Terminal Block|
|PoE Clamping Voltage||58V|
|PoE Mode Support||802.3af|
|Details || |
|Warranty||Standard 12 Month RTB|
There are yet no reviews for this product.
Please log in to write a review. Log in