Teltonika RUT276 5G RedCap Dual SIM Wi-Fi Router with Serial RS232 and RS485 interfaces

Same day dispatch for orders placed before 3pm (NZDT), Free shipping on all orders $1000+GST*

Supported Platforms

Description

Description

Specifications

Resources

Package Contents

Teltonika RUT276 5G RedCap Dual SIM Wi-Fi Router with Serial RS232 and RS485 interfaces.

RUT276 The Teltonika RUT 276 Compact Redcap 5G router brings the core 5G benefits into your IoT projects with the RUT276 Redcap router. Enjoy higher throughput and lower latency than traditional 4G networks can offer, without the cost of a full 5G module. Serial RS232/RS485 interfaces enable seamless integration with industrial equipment, whereas dual SIM and automatic failover ensure always-on connection. Its industrial design and native protocol support makes it perfect for IIoT and M2M applications where continuous uptime is critical.

Features

REDCAP 5G Low latency, high capacity, competitive pricing
Built-in RS232/RS485 to seamlessly connect with industrial equipment
Native support of Modbus, OPC UA & BACnet for industrial systems
Rugged aluminum build, wide temperature support, and flexible mounting

Details
Product code	RUT276000B00
CPU	Mediatek, 580 MHz, MIPS 24KEc
RAM	128 MB, DDR2
FLASH storage	32 MB, SPI Flash
Mobile module	5G Sub-6Ghz SA 223 Mbps DL, 123 Mbps UL; 4G LTE Cat 4 – LTE 195 Mbps DL, 105 Mbps UL
3GPP Release	Release 17
Status	IMSI, ICCID, operator, operator state, data connection state, network type, bandwidth, connected band, signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, mobile signal graphs, data sent/received, LAC, TAC, cell ID, ARFCN, UARFCN, EARFCN, MCC, and MNC
SMS	SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP
Multiple PDN	Possibility to use different PDNs for multiple network access and services
APN	Auto APN
Wireless mode	IEEE 802.11b/g/n (Wi-Fi 4) Access Point (AP), Client (STA), Mesh (802.11s), Multi-AP
Wi-Fi security	WPA2-Enterprise - PEAP, WPA2-PSK, WPA-EAP, WPA-PSK, WPA3-SAE, WPA3-EAP, OWE; AES-CCMP, TKIP, Auto-cipher modes, client separation, EAP-TLS with PKCS#12 certificates, disable auto-reconnect, 802.11w Protected Management Frames (PMF)
Wi-Fi users	Up to 50 simultaneous connections
Wireless Connectivity Features	Fast roaming (802.11r), Radio Resource Measurement (802.11k), BSS Transition Management (802.11v), Client isolation, Hide SSID, WMM
WAN	1 x WAN port 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
LAN	1 x LAN ports, 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
Network protocols	IPv4, IPv6, PPP, ARP, IPsec, IP NAT, TCP, UDP, ICMP, GRE, ESP, RIP, OSPF, BGP, Ipsec, RIP, OSPF, EIGRP, BGP, NHRP
Connection monitoring	Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection
Firewall	IPv4, IPv6, connection tracking, statefull firewall, logging, zone based firewall, custom rules, DMZ, firewall statistics, rules list, tables list,
Firewall status page	View all your Firewall statistics, rules, and rule counters
DHCP	Static and dynamic IP allocation, DHCP relay, DHCP server configuration, status, static leases: MAC with wildcards
QoS / Smart Queue Management (SQM)	Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
DNS over HTTPS	DNS over HTTPS proxy enables secure DNS resolution by routing DNS queries over HTTPS
DDNS	Supported >77 service providers, others can be configured manually
VPN	OpenVPN, OpenVPN Encryption, IPsec, GRE, PPTP, L2TP, Stunnel, DMVPN, SSTP, ZeroTier, WireGuard, Tinc, EoIP, OpenConnect
BacNET Supported modes	Router; RTU(RS485), TCP
MODBUS Supported modes	Server, Client
Supported connection types	RTU (RS232, RS485), TCP, USB
Data to Server Protocol	HTTP(S), MQTT
Modbus MQTT Gateway	Allows sending commands and receiving data from MODBUS Server through MQTT broker
DNP3 Supported modes	Station, Outstation
Supported connection types	RTU(RS232), RTU(RS485), TCP
Monitoring & Management	WEB UI, FOTA, SSH, Email, TR-069, MQTT, SNMP, JSON-RPC, RMS
RS232	RS232 interface without flow control signals
RS485	Half duplex (2-wire) RS485 interface
Serial functions	Console, Serial over IP, Modem, MODBUS gateway, NTRIP Client
Input/Output Events	Email, RMS, SMS
SD CARD	Micro SD
Applications	Samba share, Storage Memory Expansion, DLNA
Capacity	Up to 2 TB
Storage formats	FAT32, NTFS, ext2, ext3, ext4
POE IN	1 x PoE In
PoE standards	Active PoE input 802.3af Class 0 (12.94 W) on LAN port (not included)
Power Connector	2-pin industrial DC power socket
Input voltage range	9 - 57 VDC, reverse polarity protection, surge protection >58V @10us min
Active PoE	Active PoE input 802.3af Class 0 (12.94 W) on LAN port.
PoE (passive)	Passive PoE over spare pairs 4,5 (+) / 7,8 (-). Possibility to power up through LAN port. Passive PoE voltage: 16 - 57 VDC.
Power consumption	Idle: < 2 W, Max: < 3.5 W
Regulatory	CE, UKCA, EAC, UCRF, RCM, CB