Cambium 5 GHz PMP 450b High Gain Subscriber Module (Radio Only)

Same day dispatch for orders placed before 3pm (NZDT), Free shipping on all orders $1000+GST*

Supported Platforms

Description

Description

Specifications

Resources

Package Contents

Cambium 5 GHz PMP 450b High Gain Subscriber Module (Radio Only).

The PMP 450 platform has proven to be the most scalable and highest capacity multipoint platform on the market. Featuring massive MU-MIMO and beamforming along with a host of advanced features, PMP 450 is the choice of the most demanding operators, and is now available for use in CBRS.

Note: this is the radio component only, power supplies (N000900L001) and antenna assemblies (N050045D002) are sold separately.

Features

Ultra-wide band radio supports 4900 MHz to 5925 MHz
Capable of up to 300 Mbps aggregate in a 40 MHz channel
Can function as a Point-to-Point (PTP) link or as a Subscriber Module (SM)
Gigabit Ethernet interface provides the maximum transfer rates to the device
Available in mid-gain (17 dBi), high-gain (24 dBi) and connectorized versions
3.5 mm audio jack allows direct connection of headphones for alignment without any adaptors
New System on a Chip (SoC) enhances packet processing power more than 4x that of the 450 subscriber module (SM)

Details
Product Code	C050045B021B
Frequency Range	4900–5925 MHz
Channel Width	5 / 10 / 15 / 20 / 30 or 40 MHz
MAC (Media Access Control)	Layer Cambium Networks proprietary
Physical Layer	2x2 MIMO OFDM
Ethernet Interface	100/1000 BaseT, full duplex, rate auto negotiated, 802.3 compliant
Protocols Used	IPv4, IPv6, UDP, TCP/IP, ICMP, Telnet, SNMP, HTTP, FTP
Network Management	IPv4/IPv6 (dual stack), HTTP, HTTPS, Telnet, FTP, SNMPv2c and v3, Cambium Networks cnMaestro
MTU	1700 bytes
VLAN	802.1ad (DVLAN Q-inQ), 802.1Q with 802.1p priority, dynamic port VID
PPS	50,000
Latency	3 - 5 ms, typical
GPS Synchronization	Yes, synchronized by Access Point or via 3.5mm port using cnPulse (for PTP mode)
Mean Time Between Failure	> 40 Years
Environmental	IP55; Optional glands to enhance to IP67 - Part number N000000L135A
Temperature / Humidity	-40°C to 60°C (-40°F to 140°F), 0-100% non-condensing
Power Consumption	9 W typical, 12 W peak
Input Voltage	20-32 VDC
Transmit Power Range	54 dB dynamic range (to EIRP limit by region) (1 dB step)
Maximum Transmit Power	+27 dBm (MIMO, combined V+H)