This product is part of the Ubiquiti UniFi Enterprise Partner Program (EPP) and requires Deal Registration approval before purchase.
Please complete this Deal Registration prior to ordering and allow 24-48 hours for approval.
- (8) 10G SFP+ Ports
- (48) 25G SFP28 and (6) 100G QSFP28 ports
- Multi-Chassis Link Aggregation (MC-LAG) support
- Layer 3 automatic failover (VRRP) support
- BGP Dynamic Routing
- (2) included hot-swappable power modules, with 1+1 redundancy
- (5) included hot-swappable fan modules, with 4+1 redundancy
| Details | |
|---|---|
| Manufacturer's Code | ECS-Aggregation |
| Dimensions | 442.4 x 43.7 x 496 mm |
| Weight | Without mounting brackets: 9.9 kg, With mounting brackets: 10 kg |
| Enclosure Material | SGCC steel |
| Slide Rails Support | The rails support 482.6 mm four-post racks with square holes (9.5 x 9.5 mm) and posts depths ranging from 650 to 1,000 mm |
| Networking Interface | (6) 100/40G QSFP28 ports, (48) 25/10G SFP28 ports - Note: 1 Gbps port speed is not supported |
| Total Non-Blocking Throughput | 1.8 Tbps |
| Switching Capacity | 3.6 Tbps |
| Forwarding Rate | 2.3 Bpps |
| Supported VLANs | 1,000 |
| MAC Address Table Size | 128,000 |
| L3 Table Size | ARP Entries: 96,000, IPv4 Routes: 288,000 |
| Packet Buffer Size | 24 MB |
| Access Lists | IPv4: 512, MAC: 512 |
| Power Method | (2) Universal input, 100—240V AC |
| Power Supply | (2) Hot-swappable AC/DC 550W power modules |
| Redundancy | Multi-Chassis Link Aggregation (MC-LAG), (2) Hot-Swappable PSUs, (5) Hot-Swappable Fans |
| Layer 3 Features | DHCP Server (Local Networks), DHCP Relay, Inter-VLAN Routing (Local Networks), Static Routing (Local Networks) |
| Layer 2 Features | LACP Port Aggregation, MC-LAG, STP & RSTP, Advanced IGMP Configuration (Querier, Fast Leave, Router Port), IGMP Snooping, MAC-Based ACLs & Device Isolation, DHCP Snooping & Guarding, Egress Rate Limit, Flow Control, MAC Address Blocking, IP-Based ACLs & Network Isolation, MAC-Based Port Restriction, Port Isolation, Port Mirroring, Jumbo Frames, LLDP-MED, Voice VLAN, Loop Protection |
| Form Factor | Rack mount (1U, Full-Depth) |
| Etherlighting™ | Yes |
| Supported Voltage Range | 100—240V AC |
| Maximum Power Consumption | 340W |
| ESD/EMP Protection | Air: ± 12kV, contact: ± 8kV |
| Services SMB Layer3 | 100G/25G Fiber Switch |
| LCM Display | (1) 1.3" touchscreen |
| Ambient Operating Temperature | -5 to 40° C |
| Ambient Operating Humidity | 10 to 95% noncondensing |
| Heat Dissipation | 1160 BTU/hr |
| NDAA Compliant | Yes |
| Management | UniFi Network Version 8.5.6 and later |
| Certifications | CE, FCC, IC, Anatel: 01327-25-08356 |
| Details | |
|---|---|
| Power Supply | (2) IEC Power Cords, (2) Hot-swappable AC/DC 550W power modules |
| Mounting Hardware | 1U Rackmount, Slide Rails |































































































